Notes of Repair Parts of Portable Gasoline Generator(II)
f) When measuring insulation resistance or withstand voltage test of portable gasoline generator, the test area must be separated with a rope and hang out dangerous high voltage warning signs to prevent unnecessary personnel from entering the building to lead to accidents. Unless there is specified on the general components, you can use with 500-volt level measuring megohm insulation resistance.
g) When disassembly the portable gasoline generator, there are problems abnormal, you should promptly notify the manufacturer.
h) You can only use carbon dioxide fire extinguishers when store parts removed from the portable gasoline generator within the region, but not water or chemical fire extinguishers.
i) The hydrogen cooler and outlet ceramic casing of portable gasoline generator removed should not left in outside. Remove as soon as possible after the repair is completed, within the time back to the portable gasoline generator installed.
j) The parts removed from portable gasoline generator must be properly placed in the shop off the ground, place with plastic sheet or cloth board. Then cover tarps on the part. The parts surface of portable gasoline generator should be coated with rust inhibitor component, if it is found wet or soiled, it should be cleared immediately, if it is rust, it should immediately remove the rust and re-coated with anti-rust agent.
.jpg)
.gif)